Lincoln Windows & Patio Doors

Specialty Windows

Vinyl Clad

Modern architecture often includes higher sidewalls and open spaces. Filling a gable end with glass, including accent windows in a foyer or adding transoms to windows and patio doors has never been easier - we have just the right size and shape.

Lincoln offers rectangular & geometric units as well as radius products together totaling 20 different designs. Specialty windows can be complementary to our standard product or used as a creative focal point.

StormPoint Series


  • Exterior
  • Interior
  • Glass
  • Lites & Grilles
  • Configurations
  • Technical Data
  •                                     

Finishes

Our vinyl clad product comes in two extruded finishes, White and Adobe. These two popular colors have been engineered for low-maintenance and to resist chalking.

 

White Adobe  

Painted Vinyl

New for 2015, we've added six (6) painted finishes to expand the color options for designers and builders. The Lincoln paint process is an evironmentally friendly water-based application process with ultra low VOC emissions, excellent weathering properties, high abrasion resistance and superior hardness.

Actual color may vary from image on computer screen. Please see your Lincoln dealer for the latest available colors.

 

Ivory Beige Coffee Bean Hartford Green Bronze Black  

Trim

Choose from J-channel, 2” brickmould or 3-1/2” flat casing in both White and Adobe, also available in six (6) painted finishes (Ivory, Beige, Coffee Bean, Hartford Green, Bronze and Black). These trim options are factory applied with no additional lead time and feature fusion welded top corners and a mechanically fastened sill nosing. The brickmould and flat casing incorporates a 1” J-channel pocket extruded into the trim for quick installation of any siding type and a nailing fin for better weather protection. Both trim options are also available for radius units.

 

2" Brickmould 3-1/2" Flat Casing 7/8" Sill Nosing  

Spread Mulls

Typical mulling is done with a tight unit to unit mull clip. Spread mulls add additional spacing between windows and patio doors. Popular rational for doing so would include: accommodating a special opening with standard size windows, to achieve a ‘heavier’ look and working around essential structural framing. Available in all standard and painted finishes.

Spread mulls can be done both vertically and horizontally.

 

Standard Tight Mull 5/8"  

Wood Species

Nothing enhances the look and feel of a room more than the richness and beauty of wood. Our standard pine interior is fine for most applications, but if you are looking to really enhance the character of your project, we offer five additional wood species.

 

 
Alder Cherry Fir Mahogany Oak Pine      

Finishes

Natural Wood

Lincoln will leave your interior wood surface sanded smooth, ready for stain and sealer.

 

   

Primed

If you plan to paint the interior of your windows and patio doors, you can have them primed with a white factory applied water-based acrylic latex primer.

 

 

Pre-Finished White

To take things a step further, we also offer a factory applied top-coat of paint. Pre-Finished White is intended to be your final coat of paint and reduce jobsite finishing costs.

 

Jamb Extensions

When installing a window, increasing the depth of the window frame to accommodate the wall thickness is sometimes necessary. This can easily be accomplished with the use of jamb extensions available in all six wood species.

 

Direct Set Square Stop

We've taken a contemporary design turn with a new square stop glazing option for direct set windows. This new stop gives the interior of our direct set windows a cleaner finish and appearance, while still maintaining the overall warmth of a slightly profiled design.

 

Mull Casings

This is an interior trim covering that hides the joinery between mulled window assemblies and is commonly used when purchasing an applied extension jamb. Mull casings are available to match our wood species.

 

Trim - Radius Units Only

Lincoln offers interior trims in ten profiles. The benefit to our customers is the ability to shape the trim for a radius unit at the time of production. In addition, plinth blocks are available, to facilitate joining radius to straight trim.

 

GR-499 F-131 Ranch Princeton Colonial
RB3-Howell WP-444 WP-445 WP-442 WM-356

The glass in windows and patio doors has the single largest effect on energy efficiency. Lincoln’s standard insulated glass offering includes double strength glass combined with a warm edge spacer. For greater energy efficiency, argon is added to all Low-E glass units, at no cost to the customer, with the exception of those units requiring capillary/breather tubes. These units include, but are not limited to, glass 12” and less in width or height and units shipped over high elevations. Lincoln does not guarantee that the initial argon fill rate will be maintained over the life of the product. Argon depletion may decrease energy efficiency. For more information, contact your local dealer or Lincoln Wood Products, Inc.

Overall insulated glass dimensions are 11/16” on double hungs, 7/8” on casements and 3/4” on patio doors. Choose Lincoln’s standard glass or a combination of energy efficient, low maintenance and specialty glass options for appearance, performance and comfort.

Energy Efficient Options

  • Clear I.G.
  • LoĒ²-272®
  • LoĒ³-366™/Neat®
 

Low Maintenance Options

  • Neat®
  • Preserve®
 

Patterned

 

Pattern 62 Matte Frost Horizontal/Vertical Reed Rain Glue Chip

Tinted

Bronze Grey  

LoĒ-180™, LoĒ²-272®, LoĒ-i89™, LoĒ³-366™, Neat® and Preserve® are trademarks of Cardinal IG.

There are not only choices in the glass itself, there’s also variation in glazing. Here is another opportunity to have your windows and doors made to fit the interior design, décor and style of the room. Additionally, the exterior interacts with the overall architecture and creates fantastic curb appeal. Enhancing windows and doors with lite divisions definitely puts the icing on the cake. Although there are standard lite configurations designated for all products, custom designs are also welcome.

Simulated Divided Lites

Windows and doors may be enhanced with simulated divided lites. Both the interior wood bars and the exterior vinyl bars are sealed to the glass with 3M adhesives and are available in all three vinyl colors.

Simulated divided lites are available in 5/8”, 7/8”, 1-1/8” and 2” bar widths.

 

Exterior Bars

   

 

 
5/8" Bar 7/8" Bar 1-1/8" Bar 2" Bar

Interior Profiled Bars

   

 

 
5/8" Bar 7/8" Bar 1-1/8" Bar 2" Bar

Interior Square Bars

   

 

 
5/8" Bar 7/8" Bar 1-1/8" Bar

Interior Wood Grilles

Interior wood grilles are available in single profile widths of 5/8”, 1”, and 1-1/4” and a double profile width of 7/8”. These can be ordered with or without a perimeter surround. Interior grilles offer the convenience of removal for the cleaning of interior glass surfaces.

 

With Surround Without Surround  

Single Profile

     

Double Profile

 
5/8" Bar 1" Bar 1-1/4" Bar   7/8" Bar  

Patterns

Colonial

 

Gothic

     

Sunburst

 

Diamond

Spider Web

 

Queen Anne

 

Prairie

 

Combinations

 

Rectangular & Geometric Shapes

Rectangle Trapezoid Trapezoid Pentoid Parallelogram Triangle Hexagon Octagon Extended Octagon  

Radius Shapes

Circle Oval Half Round Extended Leg Half Round Quarter Round Extended Leg Quarter Round Gothic  
 
Extended Leg Segment Extended Leg Segment Segment Ellipse Extended Leg Ellipse  

NOTES:

You must have Adobe Acrobat Reader installed on your computer to view PDF documents. You can download the latest free version of Acrobat from Adobe's website.

If you do not have a CAD program installed on your computer, DXF files can be viewed in CAD viewing programs such as DWG TrueView. You can dowload the latest free version of TrueView from Autodesk's website.

Firefox users - To view DXF files, you must either use Internet Explorer or right-click on the link, Save Target As to your computer and open the file from there.

If you cannot find what you are looking for or if you need more information, feel free to contact us.

Architectural Details

Direct Set Window - AIA Specifications
Minimum & Maximum Sizes
Impact Resistance & Wind-borne Debris Test Data
NFRC Performance Data
Clear Openings

CAD Drawings

Cross Sections

Direct Set Window - Horizontal Cross Section
Direct Set Window - Vertical Cross Section
Exterior Trim - Vinyl
Interior Trim
Installation Accessories

Dimensioned Cross Sections

Grids

Appropriate selection of Lincoln product which conforms to applicable laws, ordinances and building codes is the responsibility of the project architect or builder.